Interfacing of ADC to 8051

Interfacing of ADC to 8051

      ADC (Analog to Digital converter) forms a very essential part in many embedded  projects and this article is about interfacing an ADC to 8051 embedded controller. ADC0804 is the ADC used here and before going through the interfacing procedure, we must neatly understand how the ADC 0804 works.

Interfacing Seven Segment Display to 8051

Interfacing Seven Segment Display to 8051

        This article is about how to interface a seven segment LED display to an 8051 microcontroller. 7 segment LED display is very popular and it can display digits from 0 to 9 and quite a few characters like A, b, C, ., H, E, e, F, n, o,t,u,y, etc. Knowledge about how to interface a seven segment display to a microcontroller is very essential in designing embedded systems. A seven segment display consists of seven LEDs arranged in the form of a squarish ’8′ slightly inclined to the right and a single LED as the dot character. Different characters can be displayed by selectively glowing the required LED segments. Seven segment displays are of two types, common cathode and common anode. In common cathode type , the cathode of all LEDs are tied together to a single terminal which is usually labeled as ‘com‘ and the anode of all LEDs are left alone as individual pins labeled as a, b, c, d, e, f, g & h (or dot) . In common anode type, the anode of all LEDs are tied together as a single terminal and cathodes are left alone as individual pins. The pin out scheme and picture of a typical 7 segment LED display is shown in the image below.

Wall Painting Robot - Future Scopes and Applications

FUTURE SCOPE:

1. With the higher supporting column, robot can be used for painting an even larger section of wall.

Wall Painting Robot - Circuit Diagram

 

1. In above circuit diagram two ICs are used whichare L298 & micro-controller IC 89C5.

2. L298 IC is known as driver IC this IC is used to drive the motor. In the given circuit diagram two L298 IC are used.